Review: List

Find Us On Facebook!

Return to 9mm-115 Range Time Performance HP's
Quantity of 500
Diameter: 0.355

Sort By::

Page of 2

3 of 3 people found the following review helpful:

First test drive was perfect	November 23, 2021
Reviewer: Andrew from Austin, TX United States

Just tried these 115gr HP plated bullets in my Glock 19 gen5. Loaded for 1100 fps with 1.075" COL. Cycled perfectly in rapid fire. Consistently accurate. I'm putting my RNs on the shelf and only loading these now for target and practice shooting.

Was this review helpful to you?

2 of 2 people found the following review helpful:

Great Bullets Great price	February 16, 2021
Reviewer: Ronald Landenberg from Bad Axe, MI United States

I find their prices fair and shipping fast! I’ve done three orders through them and have always be more then please with the speed of receiving my orders. Some companies have taken three week to a month to get my order. But the most I’ve had to wait is ten days! Only Amazon Prime is faster but can get my bullets from them anymore their out of stock all the time.

Was this review helpful to you?

2 of 2 people found the following review helpful:

extreme bullets	October 26, 2020
Reviewer: Timothy Anderson from Merritt Island, FL United States

they came through when nobody else had any stock,always get a few extra in every order no issues with their service at all 10stars

Was this review helpful to you?

6 of 15 people found the following review helpful:

just OK	June 8, 2018
Reviewer: T.R. from AZ United States

Bullets are ok, nothing really special over any other brand of plated bullets. Slowest shipping I have ever encountered with any bullet company and I've tried many in over 45 years of reloading. These were recommended by a friend who bought them locally, I'll stick with another company I usually use.

Was this review helpful to you?

14 of 16 people found the following review helpful:

Awesome	January 26, 2017
Reviewer: Cletus from Ohio

Upon first receiving these I was taken back by how nice they looked. Compared next to some 124gr FMJ Hornady's I had lying around, they were much more shiny (I know kind of a moot point, but I like shiny things). I then weighed out random bullets and out of 20 of them, they were all +/- .2gr. I consider this plenty acceptable, espically considering that with the hornady's I had to start 5 different weight catagories preforming the same random test. Yes, that's 5 different groups within 20 bullets but I digress.
So I moved on to loading, and they shot fantastic out of both my Glock 19 and S&W shield. I don't think I'll go back to using other bullets. Tight groups as well as I can shoot, could probably be much better from a competition shooter but I'm more than pleased with the results. Will be buying more.

Was this review helpful to you?

24 of 29 people found the following review helpful:

115 hp Love them	December 10, 2015
Reviewer: John from Kalamazoo, MI United States

I like these very much.. I could not find any load info. I researched similar bullets I came up with 1.075 oal and I'm using 4.2gn titegroup,4.5gn w231 or 5.8gn power pistol in my XD9 these are middle of the road.. I tried 3.9 and 4.0 in the tg and some stove piped and didn't lock chamber back on last round..Looked real sooty.. I have loaded close to 2000 so far and have another 1500 projectiles on hand. I am NOT suggesting use of any of my recipes USE AT YOUR OWN RISK DO YOU OWN RESEARCH ALWAYS
Well I'm back again 12/9/15
I just tried some at 1.085 oal and they wouldn't chamber in my shield 9 so i tried the 1.080 and they would chamber fine but was all over the plate so i went back to my old recipe and the 1.075 worked good tighter pattern. I had the xd9 with me and they would except the 1.085 or 1.080 but the 1.075 worked best in both guns. still using the 4.5gn w231.
Im going to order a box of these from Freedom Munitions and check their oal.

Was this review helpful to you?

3 of 4 people found the following review helpful:

9MM plated bullets	October 28, 2014
Reviewer: Pat Nemes from Auburn Hills, MI United States

I have used these now for 3 months and have seen a noticeable tightening of my groups at the 50 yard line. I had 6-7 inch groups at 50 yards with plain cast bullets and now I am getting 3-4 inch groups with these 115 gr plated bullets. I would recommend these to any shooter for use in bullseye or combat type competition

Was this review helpful to you?

6 of 8 people found the following review helpful:

Take Your Time	August 6, 2014
Reviewer: Phillip Teresi from Jacksonville, FL United States

These projectiles worked out great for me and it's hard to beat the price. I've worked out several different loads using SR762, CFE, AutoComp, and TiteGroup. All worked out great, but the best accuracy was using SR762 and TiteGroup. At 8-10 feet, I was getting 1 to 1.5" groups. I'm not sure what the previous reviewer was talking about when he claimed inaccuracy, but I can tell you I didn't have any issues. It took a few different load recipes to get it right. All guns, barrels, and actions are not created equally. Use good powder, common sense, and take your time. You'll soon find that these projectiles are accurate and they definitely do the job they were intended to do.

Was this review helpful to you?

3 of 5 people found the following review helpful:

Fantastic Bullets	June 12, 2014
Reviewer: LeRoy from Belleville, KS United States

Title says it all. I'm getting my next order put together. I have no complaints on quality. In fact I'd give them an A++.

Was this review helpful to you?

2 of 4 people found the following review helpful:

re-order.	May 2, 2014
Reviewer: Larry Wilson from Seligman, AZ United States

I just re-ordered more of these 9mm HPs. I think that says it all. They shot great and work out as the best for the money too. What more could you ask for.

Was this review helpful to you?