Review: List

Find Us On Facebook!

Return to 7.62X39- 123 FP
Quantity of 500
Diameter: 0.312

Sort By::

Page of 2

3 of 3 people found the following review helpful:

Too Short	October 27, 2020
Reviewer: Mark Sutherland from Happy Valley, OR United States

As others have stated, these will not work for semiauto rifles. Have had some bullets dislodged from the casing and jam because they are too short to seat in the case to load at proper length even loading them a 2.10. Bought 1000 bullets that I have no use for now.

Was this review helpful to you?

3 of 5 people found the following review helpful:

7.62x39 Bullets	January 3, 2019
Reviewer: Robert from Westfield, MA United States

I shoot ak and SKS. I also shoot bolt action. This head works just barely in the bolt action. Very short. They are terrible in a semi-auto. What were you guys thinking. I use your other heads and they are great, but big boo-boo here.

Was this review helpful to you?

2 of 2 people found the following review helpful:

Perfect for my Saiga	June 1, 2018
Reviewer: Anthony Cerone from San Diego, CA United States

16.6 grains IMR 4227, CCI34 primers, and 2.030-2.035 COL= awesome round! My Saiga loves them. No misfires or stove pipes! Outstanding economy range round.

Was this review helpful to you?

9 of 9 people found the following review helpful:

Work well in .303 British, 7.62x39, and 7.65 Arg	April 21, 2018
Reviewer: Mike T. from Massachusetts

Took a chance and ordered some for my Enfield No5 Jungle Carbine (1945), even though the diameter is a bit small for some .303s. Very nice reduced power loads over 11-13 gr of Unique, Herco, and Universal. Accuracy is better than the rifle's peep sights or my eyesight. Feeding is not as smooth as the long spitzer bullets the gun was designed for, so no "Mad Minute" with these, but seat them as far out as possible, crimp lightly, and they will feed nicely. The batch I got measure 0.3135.
Update 6.11.17: still working great in .303, so I decided to try these in my Chinese SKS. They work great over 16.0 gr 2400 in Remington brass with SRP. This load runs around 1900 fps and cycles my gun reliably, but less vigorously than factory loads. Accuracy is excellent at 100m, at least as good as factory steel case ammo. Any less powder will not cycle the action reliably, and I'm told this won't cycle an AK at all.
Update 4.21.18: working nicely for me in 7.65 Argentine over 11 gr Unique

Was this review helpful to you?

4 of 5 people found the following review helpful:

7.62x39-123FP out of AK47!	March 4, 2018
Reviewer: AP from Forest Lake, IL United States

Garbage!! Not to be used in AK47 unless you are ready to modify how rounds are feeding from magazine - as one of the reviewer mentioned about giving his AK "a Dremel" treatment. I'm not ready for such with my SAIGA and VEPR. Bullets are too short, and have to be loaded at 2.10" at best, or shorter for sure crimping.

Was this review helpful to you?

1 of 1 people found the following review helpful:

Not bad, but improvements could be made	January 29, 2018
Reviewer: Jeremy Jones from IN United States

I ran these through my AK and SKS with some success. They are pretty accurate to a point. Anything around 1800fps worked well and cycled the guns with decent accuracy (2.5" groups) with both guns, but I had to attack my AK with a dremel to create a feed ramp (WASR10). The SKS (Tula Arsenal) had no such trouble. I am going to attempt to get these to work in 300 BO as well and will report back.

Was this review helpful to you?

8 of 8 people found the following review helpful:

Short... Very short bullet!	July 28, 2017
Reviewer: Michael Beal from Salem, IL United States

Ordered 500 of these to test out in my 7.62x39 AR. Received them yesterday and they look great. OAL and weight is consistent bullet to bullet, seem to cycle well, but...

These things are SHORT. Really short for caliber. One reviewer stated he was seating to 2.200". I have no clue how! Seat depth per the Western Powders manual is 2.100" and that's not enough to get to the case shoulder with this bullet. There is no way to maintain accuracy below 5MOA at 100m with these bullets seated any longer than 2.100". Why, then, are these bullets so short? Changing up the alloy to make a longer bullet of equal weight would help.

I see others having feeding issues with these loads, mainly because of the bullet slamming into the AK / SKS feed ramp. Narrowing the meplat and extending the nose would help not only correct the feeding issues but would also give a longer profile improving the seating depth issue and increase maximum usable velocity while still reducing barrel fouling.

Was this review helpful to you?

5 of 5 people found the following review helpful:

Great in 300 blackout	October 5, 2016
Reviewer: Andrew Choi from Hanover, PA United States

I use these bullets in 300blackout they shoot so great. Swaged them using lee 308 die and use wolf srm primers over 13gr lil gun. I would have never known about these great bullets if it werent for a good friend that gave a handful to try. Thank you extreme bullets for making a great bullet at a great price.

Was this review helpful to you?

5 of 5 people found the following review helpful:

7.62 Shooting well in MY SKS!	May 2, 2015
Reviewer: christopher Manzo from Middle River, MD United States

I have used about a thousand of these in a Norinko SKS. I replace the steel core in Tula and Brown bear. Also in brass reloads. Length set to 2.050 COL. My SKS likes polymer magazines,10,20 and 30 round. Fired well in the original magazine. I have had no issues , accuracy if fine and I shoot regulary indoors with this bullet, Steele is not permitted. VERY HAPPY!

Was this review helpful to you?

6 of 6 people found the following review helpful:

Definitely NOT for SKS	April 28, 2015
Reviewer: Tom Zeeba from Wilkes-Barre, PA United States

As a previous poster noted, these are not intended for SKS and AK-type rifles. The flat point fails to engage the feed ramp and allows the cartridge to slam into the breech face, pushing the bullet further into the case. I still shot them over a chronograph to see if there was a velocity difference, but only in PITA, single-shot mode. There was little difference in velocity compared to the .311 bullets I've been using.

Was this review helpful to you?